Specially designed for Neo geo pocket models. The color model cannot be used.

Aging motherboards are not supported.

As shown in the figure, this aging motherboard requires a voltage of 3.7V to start!

If it cannot be turned on, please replace it with a new battery or another brand of battery. AAA battery voltage requires 1.2V to 1.5V

he wire on the cable must be connected to the positive pole of the battery base! The wires on the cable are very thin. If it is broken, please weld a new wire by yourself. We are not responsible.

Product features:

1) IPS LCD screen. The size is as big as the original.Trim the shell slightly。The size of the display screen is the same as the original one, can use the original lens.

2)Touch to adjust LCD brightness and display style. Short touch to adjust the display style. Long touch can adjust the brightness of LCD screen. With memory function.

3)Very energy-saving. AAA battery can be used for about 4 hours.

Each set of LCD has been tested before shipment. You can test it again like this before installing.

Test before installation. It is helpful to find out the causes of problems in later installatio.

Please see the installation precautions first. The installation tutorial is at the bottom.

Do not squeeze the back and border of the LCD. Squeezing can cause uneven backlight, light spots and black spots. As shown in the figure below, due to the extrusion of the LCD frame, there are bright spots on the edge.

Do not wipe the LCD screen with a coarse paper towel. It will leave a scratch.

Do not wipe the LCD screen with a very wet paper towel. The LCD will water in. There are light spots and dark spots.

Remove the LCD protective film and install the LCD immediately. Do not touch the LCD with your hands. In this way, the LCD screen will be perfect.

Do not fold the part of the cable with electronic components, which will result in LCD display failure.

The installation tutorial has only 6 steps, which is very simple.

More than ten display styles