There is a problem with this screen. If you change the game and start it up immediately, there may be residual images from the previous game or screen flickering, which will disappear after running the game for several tens of seconds. Does not affect playing games.

This is a LCD screen, not a console! If you don't have a motherboard, you can't assemble it into a console.

Glass lens with logo

The laminated LCD screen no longer needs double-sided adhesive to fix the LCD screen. Cut the double-sided adhesive that fixes the LCD screen into a suitable shape and paste it around the mirror surface for use.

The installation method is the same as the non laminated LCD screen sold in our store. It just saves the steps of pasting the LCD screen.

https://www.aliexpress.com/item/1005004342461881.html?spm=5261.ProductManageOnline.0.0.523e4edfEcHf6D

Touch the cable. The side that must be covered with film is in contact with the shell. Gold faces inward.

Otherwise, there may be accidental touches.If you need to place touch sensing in another location.

You can cut the touch cable on the ribbon cable.

Solder wires to touch sensing points on the circuit board and extend to other locations.

Short circuit R9 resistance. It can double the brightness of the LCD screen.

GBASP does not recommend this. Because the voltage supplied by the GBASP motherboard to the LCD screen is too high. This will result in increased power consumption.

The production of bright shell is more difficult than frosted shell.It is normal for the shell to have some die marks.